Reset the Pi Pico from the Astrobe Terminal
Posted: Wed Oct 16, 2024 5:32 am
If the USB to UART adapter you are using for serial communication between your Pi Pico board and your PC has a DTR output, connect it to the RUN pin (pin 30) of the Pi Pico:
https://www.raspberrypi.com/documentati ... eries.html
You can then conveniently Reset the Pi Pico by clicking on the Reset button of the Astrobe Terminal:
https://www.raspberrypi.com/documentati ... eries.html
You can then conveniently Reset the Pi Pico by clicking on the Reset button of the Astrobe Terminal:
- Terminal.jpg (7.55 KiB) Viewed 4602 times