Reset the Pi Pico from the Astrobe Terminal

Post by **cfbsoftware** » Wed Oct 16, 2024 5:32 am

If the USB to UART adapter you are using for serial communication between your Pi Pico board and your PC has a DTR output, connect it to the RUN pin (pin 30) of the Pi Pico:

https://www.raspberrypi.com/documentati ... eries.html

You can then conveniently Reset the Pi Pico by clicking on the Reset button of the Astrobe Terminal:

: Terminal.jpg (7.55 KiB) Viewed 4583 times