Page 1 of 1
RISC5 Oberon on the $99 Arty Artix 7 FPGA Development Board
Posted: Tue Dec 08, 2015 12:35 pm
by cfbsoftware
We have now successfully ported the RISC5 processor to Digilent's latest
Arty development board which uses the Xilinx ArtixR-7 35T FPGA device and retails at $US 99.
We are planning to support our 'Embedded' version of Project Oberon (i.e. not the full 'Workstation' version) running in the internal BRAM on the FPGA device on this board. For more information on the Embedded and Workstation Project Oberon systems that can be used with the Astrobe IDE and to register your details to be notified when the Arty-targeted version is available go to:
http://www.astrobe.com/RISC5
Re: RISC5 Oberon on the $99 Arty Artix 7 FPGA Development Bo
Posted: Tue Dec 22, 2015 7:47 am
by cfbsoftware
Astrobe for RISC5 Oberon which targets the
Digilent Artix-7 Arty FPGA Development Board has now been released.
For more details and to find out how to get a free copy go to:
http://www.astrobe.com/RISC5
Re: RISC5 Oberon on the $99 Arty Artix 7 FPGA Development Bo
Posted: Thu Dec 31, 2015 4:25 am
by Helpdesk
I would like to test Astrobe for FPGA RISC5 Embedded Version.
Therefore I want to buy Artix-7 (I have already the OberonStation). On your webpage I saw the link for the
Artix-7 35T Arty FPGA Evaluation Kit
Should I order just this Artix-7 35T Arty FPGA Evaluation Kit? Do I need something else?
Re: RISC5 Oberon on the $99 Arty Artix 7 FPGA Development Bo
Posted: Thu Dec 31, 2015 4:35 am
by cfbsoftware
Yes - that is the board to buy. You will also need:
- A MicroSD card socket / breakout board
- A means of connecting the card MicroSD socket to the Arty.
- A 2GB or higher MicroSDHC card
- Software to copy our Embedded Project Oberon disk image to the MicroSDHC card.
- A Micro USB cable to connect the USB port of the Arty to the PC.
You will need a good Internet connection to download the Vivado design software (8GB ISO DVD image).
I am currently investigating SD Card socket options e.g. a six-pin adapter which will enable you to plug the board directly into a Pmod socket. I'll post more information here as and when I know more.
Re: RISC5 Oberon on the $99 Arty Artix 7 FPGA Development Bo
Posted: Tue Mar 01, 2016 9:23 pm
by cfbsoftware
cfbsoftware wrote:I am currently investigating SD Card socket options e.g. a six-pin adapter which will enable you to plug the board directly into a Pmod socket. I'll post more information here as and when I know more.
The perfect solution is now available thanks to the work of one of our Astrobe users: the
Micro SD Adapter for Xilinx ARTY FPGA Evaluation Kit. I have updated the Arty ProjectOberon Verilog files so that the adapter can be used with embedded ProjectOberon 'out of the box'. If you want to use this version register your details here:
http://www.astrobe.com/RISC5