Astrobe Forum

Perfect!

Thanks for the quick answer.

For custom boards, I would like to start programming STM32F746 through the SWD interface. Is there a way to do this directly from the Astrobe IDE? So far, I have done testing with a Nucleo board, where the board is addressed as a virtual Drive ("J:") from within the IDE. This works very well. Howeve...

(You live and learn...) The Commit command defined in the previous post does not allow to change the comments on the changes. This is quite essential. Instead, it would be much better to open the normal TortoiseSVN commit dialog to complete all desired fields. Luckily, Tortoise is a shell extension ...

If you have many embedded systems in the field, keeping track of the installed software is a real problem. It would be much easier to store the software version inside the embedded code and output this when needed. In our case, our embedded systems send status reports to their hosts and they add the...

We are using SubVersion and version management system on Delphi and would like to use this on the embedded source code as well. The possibility to add menu items in Astrobe v7.0+ gives a very nice way to do this. 1.) Integrating SubVersion We are using TortoiseSVN for Windows. This needs to be insta...

While extensively using the MATH module, we made a few modifications that made the code a bit faster and more robust. Maybe these are useful..... 1.) Avoiding unnecessary iterations during Exp The following uses some simple big steps to get a factor close to 1 and then falls back to the original Exp...

The posted Module works like a charm and frees up a Timer. Thanks!

The only difference for my LCP1769 at 120MHZ and a tick every 10mSec, is the RELOAD. The value given in the manual (120MHZ/100 - 1= 1199999) nicely produces the desired tick.

Cheers!

The article has more information than the NXP LPC manual, so it does help. In the LPC manual, the information is partly in the main section, but critical details are in the ARM section. For example, the NVIC offset vector seems to be at $3C, which is below the $40 that is the lowest in the NXP NVIC ...

We are building an "RTOS" an a LPC-1769-ARM3 and are using the standard Timer module, using Timer3 for a 10mS pulse which basically clocks everything. Following the documentation, the System Tick should do exactly the same thing. So, we thought it would be easy to convert the Timer module into a Sys...

To communicate to several peripheral devices, I needed different baud rates. After building a brief spreadsheet based on the LPC manual, I optimized a list of settings for my target (LPC1769 with MCU.PCLK=30MHZ). BaudRate DLM DLL DIVADDVAL MULVAL 1200 6 27 0 1 2400 3 13 0 1 4800 1 135 0 1 9600 0 195...